Adobe Flex

I'd like to refresh my UI knowledge after a long gap of 2+ years. By the time i left eclipse based plug-in development, i tuned myself in core application program. I did few XML server side stuff and managed a team in Java Swings and finally built an adapter for webMethods Integration server. I was into little bit of XQJ1.0 spec implementation. little bored? yes. now i get some time. Somehow i turned my attention from core application to UI.

By the time, i looked UI, it tremendously grown and more stylish too. JSP, Struts, velocity, looks like vintage classic tools to develop UI. Now i could see this is the age of Rich Internet application (RIA). As i want to part of this modern phase, i started learning Adobe flex.

I'll write my experience with Flex soon.

Stax parser's hard to solve problem

I ran into some sort of serious issues with stax parser(woodstox implementation) in the recent time. You might have also encounter the problem with woodstox.

WstxEOFException: unexpected EOF prolog row[0,1]...

According to the document, this would happen when the TCP connection is broken when the stream is being read. because of this, the XML read was not successful. But this was not in my case. My connection to http server never end. then what's the problem? what went wrong?

It took more than five hours to resolve. When the stream is received from the http connection, one of my API reads the header information of the stream and then pass the stream for further parsing, when it uses the same stream (half read by other opeartion) for parsing the rest of the response, it failed. when i reset the stream, it went very well.

So please be sure that your input stream is reset before you parse every time.

Big mess around XQJ1.0

One of the oldest JSR which has started in 2003 and not yet reached the final stage. I still doubt whether there is an active group working towards it's 1.0 spec release. Many of the comments from the approval forum says the interface level were not sufficient. There are quite a few XML databases in the market. Except XQuery there are no similar interaction layer. Data Direct is one such company trying to standardize this but in a wrong direction. As a key member in JSR-225, Data Direct might take a strong step towards its release.

Even after 6 long years, the specification fails to come to the center stage, there are chances that people might forgot XQJ. Whoever dealing with XML databases now with their own proprietary API will stick with them. Rewriting them would cost and might affect the stability. Quick releases in specification would increase the chances of stability and feature packed by early feed backs from industry.

I could find one open source implementation on proposed 1.0 spec is saxon.

Though there are chances for improvement, I'm waiting to see the XQJ spec in the limelight soon.

Five ways for tracing Java execution

I'm often faced with a situation where I need to dig into code that I didn't write. Most of it is poorly documented and, in some cases, I only have some of the sources, which means I need to decompile the rest. It's a tedious exploration. There are mainly two reasons for that: maintaining a code or using it. The later refers to 3rd party frameworks and class libraries I need to build upon. For example I may implement an interface of an event handler and I may be uncertain regarding which event fires when and what are the exact arguments I'm getting.

I usually find that it is faster to trace the code at runtime. Especially when it comes to non-trivial links between classes, like an interface with multiple implementations which may be picked at runtime. The smörgåsbord of design time tools is just insufficient.

In this post, I will summarize the common methods (I know of) for tracing the runtime execution. The tips and examples are assuming you're using Eclipse, but most of them can be achieved with other IDEs as well. I will provide some more detailed information regarding some of the techniques mentioned below in future posts.

The Basic: Breakpoints and Step-by-step Execution

Start with the simplest way: set up breakpoints and start tracing your execution.

Pros	Cons
Very simple to use and setup. Practically, all you need is a running debugger. Provides access to ALL the information, including method attributes, local variables, etc. Does not modify the code. Selective: you can decide where to break.	Stepping through code just takes too long. Moreover, you need constant attention. For each step you should decide whether you're stepping in, over or out. This makes this method impractical. When debugging event handlers one must setup breakpoints on all methods, since you're not sure which method will be called. Impossible to set breakpoints inside method when you don't have the source code.

It is best when: You need a quick and simple solution, you have all the code and you know where you want to stop. You need elaborate information in a given point (arguments, local variables, etc.).

My tip: Even if you don't have all the sources, it's possible to break when entering methods or classes by setting-up method breakpoints or class loading breakpoints.

• Class loading breakpoints are simple to set up: from Eclipse Run menu, select "Add Class Load Breakpoint...".
• In order to set method breakpoints, you will need to decompile the class file first. Use the JadClipse plug-in for that. After you decompile, you may select the method and choose "Toggle Method Breakpoint" from the "Run" menu (or by right clicking the left bar in the file next to the method header). Note that you may set regular breakpoints in decompiled sources as well, but these will not work.

The Primal: Debug messages

We continue by setting up debug messages. The simplest way is to use System.out.println statements to print out messages to the console. The next step would be to use a logging mechanism: the basic JDK logging, Apache Commons Logging or Log4j.

Pros	Cons
Very selective. Speedy execution (in case you didn't put too many). Allows printing the exact information you're interested in.	Requires code modification. This makes this impractical when you don't own the sources. Takes time to set up. In case you're not sure what you're looking for, you'll need to introduce debug messages to many methods. Makes the code dirty and introduces run-time overhead if you don't take the debug messages out afterwards.

It is best when: You own the code and you have a good idea of what you're looking for. Very good solution for event handlers. It's high performance makes it practical for understanding which event is fired when throughout the execution of complex flows.

My tip: It's easy to set up one generic method that prints out the method currently executing. The best way I'm familiar with is to get the stack trace. The last entry on the call stack will be the debug message method. The entry before that will be the method invoking it. How to obtain a stack trace:

• Since JDK 5.0: Use Thread.currentThread().getStackTrace().
• Before (JDK 1.4): create a new exception instance and use getStackTrace to obtain your call stack from the new instance (no need to "throw" it).

The Hot Shot: Dynamic Proxy

An improvement over simple debug messages. Dynamic Proxy is a special Java feature which enables the developer to introduce a proxy class, sitting in front of a given class and intercepting all the calls through a given interface. Once you intercept the calls, you may print out appropriate debug messages with all the information you require.

Pros	Cons
No need to infest the code with debug messages. The debug messages can be done in one central location. Simple to remove once you're done, thus, has no affect on performance.	Only works through interfaces. Useless for non-public methods and public methods which are not defined in an interface. Requires code modification: you need to own the code. Non selective messages printed.

It is best when: It's a great solution for event handlers. You can set up a dummy event handler with a generic proxy in seconds and see the sequence of events. This is simplest and quickest method when it comes to understanding event handlers.

My tip: You can find a code for a generic dynamic proxy on Sun's site. It's OK, but it has one small minus: it only implements the immediate interfaces implemented by the class of the instance being wrapped by the proxy. It does not implement any interface of its' ancestors. This can be easily fixed by traversing the list of ancestors and picking all the interfaces along the way. In one of the future posts I'll give a better version.

The Brute Force: Run-time Profiler

Profilers are powerful tools that trace all the calls in the system through special JVM hooks. However, it's like using a 10 pound hammer on a half inch nail.

Pros	Cons
No code modification. Can trace all the execution, even without source code. Most tools provide the ability to filter data which is less interesting (like JDK calls, getters and setters, etc).	Most good tools are expensive. Most tools take time to setup and master. Profiling will greatly degrade the system performance. It's impractical to have a long execution with the profiler collecting information. Most tools are geared towards performance measurement and neglect showing an execution path according to the actual time line. Most tools provide the calls but not the arguments.

It is best when: You want a complete picture for a very specific operation (i.e. very short execution flow).

My tip: The good tools cost around $500 per seat. Most free tools are very basic. IMHO, The best free open-source tool for the job is Eclipse Testing and Performance Tools Platform (TPTP). I've had very good experience with the tool and I highly recommend it. It can provide a sequence diagram which is one of the best ways for understanding execution. TPTP used to be my favorite before I switched to the Mac and found it's incompatible (maybe I'll try to fix it if I'll have some spare time).

The New Age: Aspects

Aspect Oriented Programming (AOP) is a non-trivial idea. Without going into the concept of Aspects, I'm just looking at the bottom line: it's a quick and easy way of intercepting the execution of your code. You can selectively set hooks around methods, constructors, field access, etc., without modifying the original code. In these hooks you can print debug messages.

Pros	Cons
Very quick and easy to setup. Selective: you can trace just the classes or method you require. Provides all the information, including arguments. No modification to the original code. Very easy to remove once you're done. Good performance. May be used in long executions.	Requires some basic understanding of AOP. Especially for setting up more complex filters. Requires rebuilding your code. This can be a problem when you need to trace a code found in a packaged JAR.

It is best when: You want to trace the execution of a code you can rebuild.

My tip: Use it. AOP is still far from the mainstream. It is uncertain whether it will ever get there. Without debating its' qualities and features, most developers can be up and running with AOP based logging in about an hour. I'll show the exact steps in one of the future posts. For Eclipse users, I recommend the Aspect Java Development Toots (AJDT).

Conclusion

What method should you choose? I'll divide this into two different cases: tracing the complete execution of a short sequence and tracing events to/from a given class or tier.

When tracing the complete execution:

1. A profiler is the simplest way. IMHO, every developer should be able to operate a profiler and have one readily available in the arsenal.
   
2. The next choice would be AOP. It's the second choice only because setting up a profiler is simpler when it comes packaged JARs. However, AOP gives more control. For example, I can see the method arguments and print them.
3. Use debug messages.

When tracing events:

1. Use AOP. Selectively capture just the interesting calls.
2. Use a Dynamic Proxy. It's like using debug messages, but a more elegant solution. AOP may be more complex first, but in the long run I would go for AOP.
3. Use debug messages.
4. Use breakpoints.

As you can see, I'm not a big fan of breakpoints in this context. Breakpoints are great when debugging your code, but not for tracing execution. There are far more efficient methods of doing that.

courtesy:-Zviki Cohen(http://zvikico.typepad.com/)